1.2.1 Display Styles

Standard Square Caps

A Standard Square pushbutton cap display is available in eight display styles; five standard styles and three additional styles accomplished by mounting the switch in a 90° clockwise rotated position.

Figure 1.2.1-A Standard Square Pushbutton Cap Display Styles
  Standard Rotated
Full Face
H Style 		   
2 Way Split


B Style



B Style (Rotated)

 
Three Way Split
E Style
C Style
E Style (Rotated)
C Style (Rotated)
Four Way Split


D Style

   

  • The letters A, B, C and D represent the four independent lighting segments in each cap as seen from the front of the cap. See Section 1.5 for various electrical interconnection options which can reduce the number of wiring connections to provide the desired illumination.
  • When specified for mounting in a rotated position, the legends on the caps are rotated in relation to the top of the cap in order to be in the proper orientation after mounting.
  • The "TOP" of cap is indicated by dot (for reference only).

 

Large Rectangular Caps

A Large Rectangular pushbutton cap display is available in sixteen display styles; eight standard styles and eight additional styles accomplished by mounting the switch in a 90° clockwise rotated position.

Figure 1.2.1-B Large Rectangular Pushbutton Display Styles
  Standard Rotated
Full Face


 



H Style   H Style (Rotated)  
2 Way Split





B Style F Style B Style (Rotated) F Style (Rotated)
Three Way Split



E Style C Style E Style (Rotated) C Style (Rotated)




J Style G Style J Style (Rotated) G Style (Rotated)
Four Way Split


 


 
D Style   D Style (Rotated)  

  • The letters A, B, C and D represent the four independent lighting segments in each cap as seen from the front of the cap. See Section 1.5 for various electrical interconnection options which can reduce the number of wiring connections to provide the desired illumination.
  • When specified for mounting in a rotated position, the legends on the caps are rotated in relation to the top of the cap in order to be in the proper orientation after mounting.
  • The "TOP" of cap is indicated by dot (for reference only).